On filters, and lubricant products marked "equivalent" or "replacement," OEM names and part numbers are for reference only. Simmons Synthetics is an independent distributor of aftermarket compressor replacement parts and is not affiliated with most manufacturers mentioned in this web site. O.E.M. (original equipment manufacturer) names are the trademarks of each manufacturer

  Loading... Please wait...

Currency Displayed in

On filters, and lubricant products marked "equivalent" or "replacement," OEM names and part numbers are for reference only. Simmons Synthetics is an independent distributor of aftermarket compressor replacement parts and is not affiliated with most manufacturers mentioned in this web site. O.E.M. (original equipment manufacturer) names are the trademarks of each manufacturer

Categories

Royal Purple Synfilm GT 68 Synthetic Gear/Heavy Duty Oil Replacement

Hover over image to zoom

  • Royal Purple Synfilm GT 68 Synthetic Gear Oil Replacement

ALS 6000 Series synthetic gear oils are formulated using synthesized hydrocarbon fluid and select additives to enhance oxidation resistance and provide maximum protection against wear, rust, corrosion and foaming.

These PAO based fluids provide significantly better thermal and oxidation stability, as well as increased protection against the loss of viscosity than do conventional good quality mineral oils. The inherently high viscosity index of these synthetic gear oil provides higher viscosities and therefore greater film thickness at higher temperatures and lower viscosities for easy start-up and minimal internal friction at lower temperatures. The low coefficient of friction of the ALS 6000 series synthetic gear oils substantially reduces power consumption and gearbox operating temperature, further prolonging the useful life of the gear oil.

APPLICATION:

ALS 6000 Series synthetic gear oils are recommended for use under severe high or low temperature conditions when lubricating industrial enclosed gears and heavily loaded plain or rolling element bearings. They are particularly recommended for applications where high oil temperatures result in short oil life or high maintenance costs.

ALS-6000 synthetic gear oils are also recommended for use in applications where the corrosion of yellow metals is a concern, as these oils do not contain additives which tend to attack metals such as brass, bronze or copper.

The ALS-6000 series synthetic gear oils are compatible with essentially all seal materials, plastics and paints, including nitrile Buna N, neoprene, viton, teflon, polyethylene, polyurethane either, fluorocarbon, polyacrylate, polysulfate, ethylene acrylic, epoxy, plastisol, PVC, acrylic paint and lacquer.

Benefits

Made from synthesized hydrocarbon fluids and selected additives.
Viscosity grades of 32, 46, 68, 100, 150, 220, 320, 460, 680 & 1000.
Low pour point.
High viscosity index.
Reduces power consumption and gearbox operating temperature.
Enhanced oxidative stability.
Excellent low temperature flow characteristics.
Excellent high temperature stability.
Maximum protection against wear, rust, corrosion and foaming.
Compatible with all seal materials, plastics and paints.

Recommended Applications

Lubrication of enclosed gears and heavily loaded plain or roller element bearings.
Recommended for high oil temperature equipment to provide longer oil life and to reduce high maintenance cost.
Developed for use in applications where the corrosion of yellow metals is a concern (Does not attack yellow metals such as brass, bronze or copper).

Materials Compatibility

ALS-6000 synthetic gear oils are compatible with most seal materials, paints and plastics.

Replacement​
Replacement for Anderol 4032, Anderol 4046, Anderol 4068, Anderol 4100, Anderol 4150, Anderol 4220, Anderol 4320, Anderol 4460, Anderol 4680, Anderol 4999, Anderol 5001, Exxon Teresstic SHP 32, Exxon Teresstic SHP 46, Exxon Teresstic SHP 68, Exxon Teresstic SHP 100, Exxon Teresstic SHP 220, Exxon Teresstic SHP 320, Exxon Teresstic SHP 460, Exxon Teresstic SHP 1000, Henkel Emery 2845, Henkel Emery 2846, Henkel Emery 2847, Henkel Emery 2849, Mobil SHC 624, Mobil SHC 626, Mobil SHC 627, Mobil SHC 629, Mobil SHC 630, Mobil SHC 632, Mobil SHC 634, Mobil SHC 636, Mobil SHC 639, Royal Lubricants Royco 5032, Royco 5046, Royco 5068, Royco 5100, Royco 5150, Royco 5220, Royco 5320, Royco 5460, Royco 5680, Sentinel Lubricants, S 75, Sentinel Lubricants S 75/80, Sentinel Lubricants S 80, Sentinel Lubricants S 75/90, Sentinel Lubricants S 90/140, Sentinel Lubricants S 140, Shell Oil Hyperia R&O 220, Shell Oil Hyperia R&O 320, Shell Oil Hyperia R&O 460, Shell Oil Hyperia R&O 680, Shell Oil Hyperia R&O 1000, Sun Oil Challenge R&O 150, Sun Oil Challenge R&O 220, Sun Oil Challenge R&O 320, Sun Oil Challenge R&O 460, Sun Oil Challenge R&O 680, Sun Oil Challenge R&O 1000, Texaco Pinnacle 32, Texaco Pinnacle 68, Texaco Pinnacle 100, Texaco Pinnacle 150, Texaco Pinnacle 220, Texaco Pinnacle 320, Texaco Pinnacle 460, Texaco Pinnacle 680, Texaco Pinnacle 1000, Summit Syngear SH 7032, Summit Syngear SH 7046, Summit Syngear SH 7068, Summit Syngear SH 7100, Summit Syngear SH 7150, Summit Syngear SH 7220, Summit Syngear SH 7320, Summit Syngear SH 7460, Summit Syngear SH 7680, Summit Syngear SH 71000, Ultrachem Chemlube 624, Ultrachem Chemlube 625, Ultrachem Chemlube 626, Ultrachem Chemlube 627, Ultrachem Chemlube 629, Ultrachem Chemlube 630, Ultrachem Chemlube 632, Ultrachem Chemlube 634, Ultrachem Chemlube 636, Unocal 76 Triton Synthetic TGO 100, Unocal 76 Triton Synthetic TGO 150, Unocal Triton Synthetic TGO 220, Total Synolan 1000/150, Total Synolan 1000/220, Total Synolan 1000/320, Total Synolan 1000/460, Total Synolan 1000/680, Gardner Denver Aeon CF 150, Gardner Denver Aeon PD XD.
Royal Purple LLC
$267.88
Weight:
48.00 LBS
Shipping:
Calculated at checkout

 Product Description

 

(877) 240-0909
 
 
 
                                                                     ALS SERIES SYNTHETIC GEAR OIL
 
 
ALS 6000 Series synthetic gear oils are formulated using synthesized hydrocarbon fluid and select additives to enhance oxidation resistance and provide maximum protection against wear, rust, corrosion and foaming.
 
These PAO based fluids provide significantly better thermal and oxidation stability, as well as increased protection against the loss of viscosity than do conventional good quality mineral oils. The inherently high viscosity index of these synthetic gear oil provides higher viscosities and therefore greater film thickness at higher temperatures and lower viscosities for easy start-up and minimal internal friction at lower temperatures. The low coefficient of friction of the ALS 6000 series synthetic gear oils substantially reduces power consumption and gearbox operating temperature, further prolonging the useful life of the gear oil.
 
APPLICATION:
 
  • ALS 6000 Series synthetic gear oils are recommended for use under severe high or low temperature conditions when lubricating industrial enclosed gears and heavily loaded plain or rolling element bearings. They are particularly recommended for applications where high oil temperatures result in short oil life or high maintenance costs.
 
  • ALS-6000 synthetic gear oils are also recommended for use in applications where the corrosion of yellow metals is a concern, as these oils do not contain additives which tend to attack metals such as brass, bronze or copper.
 
  • The ALS-6000 series synthetic gear oils are compatible with essentially all seal materials, plastics and paints, including nitrile Buna N, neoprene, viton, teflon, polyethylene, polyurethane either, fluorocarbon, polyacrylate, polysulfate, ethylene acrylic, epoxy, plastisol, PVC, acrylic paint and lacquer.
 
Benefits
 
  • Made from synthesized hydrocarbon fluids and selected additives.
  • Viscosity grades of 32, 46, 68, 100, 150, 220, 320, 460, 680 & 1000.
  • Low pour point.
  • High viscosity index.
  • Reduces power consumption and gearbox operating temperature.
  • Enhanced oxidative stability.
  • Excellent low temperature flow characteristics.
  • Excellent high temperature stability.
  • Maximum protection against wear, rust, corrosion and foaming.
  • Compatible with all seal materials, plastics and paints.
 
Recommended Applications
 
  • Lubrication of enclosed gears and heavily loaded plain or roller element bearings.
  • Recommended for high oil temperature equipment to provide longer oil life and to reduce high maintenance cost.
  • Developed for use in applications where the corrosion of yellow metals is a concern (Does not attack yellow metals such as brass, bronze or copper).
 
Materials Compatibility
 
  • ALS-6000 synthetic gear oils are compatible with most seal materials, paints and plastics.

 

TYPICAL CHARACTERISTICS-- ALS SERIES SYNTHETIC GEAR OIL OILS (GEAR OILGRADES)

ISO viscosity grade

32

46

68

100

150

AGMA grade

-

1

2

3

4

API gravity (ASTM D 1298)

35.0

36.0

33.0

32.5

30.8

Specific gravity @ 60/60oF (ASTM D 1298)

0.848

0.845

0.860

0.863

0.872

Density, lbs/gal (ASTM D 1298)

7.08

7.04

7.15

7.19

7.26

Viscosity cSt @ 40°C (ASTM D-445) 
Viscosity cSt @ 100°C (ASTM D-445)

30.0

6.0

42.3

7.3

69.5

12.4

106

18.0

150

17.5

Viscosity index (ASTM D 2270)

148

136

180

189

128

Pour point oF (oC) (ASTM D-97),

-70 (-57)

-70 (-57)

-55 (-48)

-45 (-43)

-40 (-40)

Flash point oF (oC)  (ASTM D-92),

500 (260)

530 (277)

500 (260)

500 (260)

475 (246)

Copper corrosion strip rating (ASTM D-130) (3 Hours @ 212 F)

1b

1b

1b

1b

1b

Oil-water separation time, min (ASTM D-1401)

15

15

45

45

--

Four ball wear scar diameter, mm (ASTM D-2266) (1 Hour/75 C/1200 rpm/40 kg)

0.50

0.50

0.50

0.50

0.40

 

 

TYPICAL CHARACTERISTICS-- ALS SERIES SYNTHETIC GEAR OIL OILS (GEAR OILGRADES)

ISO viscosity grade

220

320

460

680

1000

AGMA grade

5

6

7

8

8A

API gravity (ASTM D 1298)

30.2

29.6

29.2

28.4

27.5

Specific gravity @ 60/60oF (ASTM D 1298)

0.875

0.878

0.875

0.885

0.890

Density, lbs/gal (ASTM D 1298)

7.29

7.31

7.34

7.368

7.41

Viscosity cSt @ 40°C (ASTM D-445) 
Viscosity cSt @ 100°C (ASTM D-445)

234

23.7

320

29.1

480

38.4

654

55.3

937

68

Viscosity index (ASTM D 2270)

127

124

124

146

144

Pour point oF (oC) (ASTM D-97),

-35(-37)

-30 (-34)

-20 (-29)

-30 (-34)

-20 (-29)

Flash point oF (oC)  (ASTM D-92),

475 (246)

470 (243)

465 (241)

520 (271)

520(271)

Copper corrosion strip rating (ASTM D-130) (3 Hours @ 212 F)

1b

1b

1b

1b

1b

Oil-water separation time, min (ASTM D-1401)

30

30

30

30

--

Four ball wear scar diameter, mm (ASTM D-2266) (1 Hour/75 C/1200 rpm/40 kg)

0.40

0.40

0.40

0.40

0.40

 

 
 
Replacement​
Replacement for Anderol 4032, Anderol 4046, Anderol 4068, Anderol 4100, Anderol 4150, Anderol 4220, Anderol 4320, Anderol 4460, Anderol 4680, Anderol 4999, Anderol 5001, Exxon Teresstic SHP 32, Exxon Teresstic SHP 46, Exxon Teresstic SHP 68, Exxon Teresstic SHP 100, Exxon Teresstic SHP 220, Exxon Teresstic SHP 320, Exxon Teresstic SHP 460, Exxon Teresstic SHP 1000, Henkel Emery 2845, Henkel Emery 2846, Henkel Emery 2847, Henkel Emery 2849, Mobil SHC 624, Mobil SHC 626, Mobil SHC 627, Mobil SHC 629, Mobil SHC 630, Mobil SHC 632, Mobil SHC 634, Mobil SHC 636, Mobil SHC 639, Royal Lubricants Royco 5032, Royco 5046, Royco 5068, Royco 5100, Royco 5150, Royco 5220, Royco 5320, Royco 5460, Royco 5680, Sentinel Lubricants, S 75, Sentinel Lubricants S 75/80, Sentinel Lubricants S 80, Sentinel Lubricants S 75/90, Sentinel Lubricants S 90/140, Sentinel Lubricants S 140, Shell Oil Hyperia R&O 220, Shell Oil Hyperia R&O 320, Shell Oil Hyperia R&O 460, Shell Oil Hyperia R&O 680, Shell Oil Hyperia R&O 1000, Sun Oil Challenge R&O 150, Sun Oil Challenge R&O 220, Sun Oil Challenge R&O 320, Sun Oil Challenge R&O 460, Sun Oil Challenge R&O 680, Sun Oil Challenge R&O 1000, Texaco Pinnacle 32, Texaco Pinnacle 68, Texaco Pinnacle 100, Texaco Pinnacle 150, Texaco Pinnacle 220, Texaco Pinnacle 320, Texaco Pinnacle 460, Texaco Pinnacle 680, Texaco Pinnacle 1000, Summit Syngear SH 7032, Summit Syngear SH 7046, Summit Syngear SH 7068, Summit Syngear SH 7100, Summit Syngear SH 7150, Summit Syngear SH 7220, Summit Syngear SH 7320, Summit Syngear SH 7460, Summit Syngear SH 7680, Summit Syngear SH 71000, Ultrachem Chemlube 624, Ultrachem Chemlube 625, Ultrachem Chemlube 626, Ultrachem Chemlube 627, Ultrachem Chemlube 629, Ultrachem Chemlube 630, Ultrachem Chemlube 632, Ultrachem Chemlube 634, Ultrachem Chemlube 636, Unocal 76 Triton Synthetic TGO 100, Unocal 76 Triton Synthetic TGO 150, Unocal Triton Synthetic TGO 220, Total Synolan 1000/150, Total Synolan 1000/220, Total Synolan 1000/320, Total Synolan 1000/460, Total Synolan 1000/680.

Vendors Other Products

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

What's News

  • Base Oil Groups

    Base oil groupsMineral oil term is used to encompass lubricating base …

  • Fire Point

    The fire point of a fuel is the lowest temperature at which the vapour of that …

  • Extreme Pressure Additive

    Extreme pressure additives, or EP additives, are additives for lubricants with …

newsletter

Follow us on

Check out with PayPal

Copyright 2017 Shop Simmons Synthetics. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the Royal Purple Synfilm GT 68 Synthetic Gear/Heavy Duty Oil Replacement to your wish list.