Ultimate Industrail Descaler can dissolve approximately 1.5kg of calcium carbonate scale per gallon in concentrated form. It does not need to be heated up during cleaning. Because Ultimate Descaler is free rinsing, there is no need to neutralize or pacify the system. The uniqueness of Ultimate Descaler allows you to clean some equipment while still in operation, using a minimum of your personnel.
Ultimate Industrial Descaler provides an excellent method to clean equipment without expensive disassembly. In many applications, the cleaning can be accomplished while the system is in operation . Ultimate Industrial Descaler can remove scale in small, inaccessible places that cannot otherwise be cleaned.
Ultimate Industrial Descaler comes in a pale yellow color that changes to a light blue color when it is spent . There are advantages to this color change:
1. Does not require pre-mixing; does not separate.
2. Effective-one gallon dissolves approximately 1.5 lbs. of scale.
3. Changes color from yellow to blue when spent.
4. Pleasant has a pleasant citrus odor, free rinsing and low foaming.
5. Re-usable, if not spent.
Ultimate Industrial Descaler is especially designed to safely remove lime deposits or water scale from:
Heat Exchangers, Heaters, Molders, Welders, Rinse Tanks, Dryers, Extruders, Mixers, Vacuum Pumps, Condensers, Chillers, Bearing, Conveyors, Fans, Refrigeration Equipment, Compressors, Fans, Presses, Mill Rolls, Scrubbers, Pulverizers, Loop Systems, Pumps, Stills, Sterilizers, Piping, Injection Molders, Towers and Tubers, Generators, Boilers, Cooling Towers, Ball Mills, Evaporators, Diesel Generators and many more applications....
Ultimate Industrial Descaler is not recommended for use on aluminum, certain aluminum alloys, zinc and alloys of magnesium . It is recommended that you should test samples of materials in question to be evaluated before using Ultimate industrial Descaler to treat lime or water scale deposits on these materials.
Concentrated Ultimate Industrial Descaler solution may discolor some chromed and stainless steel surfaces.
Application . Ultimate Industrial Descaler is most effectively used by circulating through the equipment to be cleaned . When possible, circulation should be up-flow Ultimate Industrial Descaler can also be used by filling the equipment to be cleaned and allowing it to set until scale has disappeared or the Ultimate Descaler has changed colors to indicate that it is spent, The cleaning operation normally takes two to six hours. The equipment should be vented at all times since carbon dioxide gas evolves during the disassociation of the lime scale . For more detailed instructions, contact your Ultimate Industrial Descaler distributor
Availability. Ultimate Industrial Descaler is available in 55 and 30 gallon drums . It is also available in 5 gallon pails and 330 gallon totes.
Ultimate Industrial Descaler is Biodegradable, non-toxic, non-corrosive, non-flammable and non-hazardous when used as directed .
Ultimate Industrial Descaler is U.S.D.A. approved acceptable for use as an acid cleaner in all departments of official establishments operating under the Federal Meat, Poultry, Shell Egg Grading and Egg Products Inspection Program.
Consider the following advantages of using Ultimate Industrial Descaler
• Changes color when spent
• Pleasant Odor
• Free Rinsing
• Made in U.S.A
Replacement for Summit Sublime descaler, Rydlyme biodegradable descaler.
All prices are in USD