Loading... Please wait...

Currency Displayed in

Categories

Contamination Control/ Lubricant filtration units

WE WANT TO BE ABLE TO COUNT ON OUR INDUSTRIAL EQUIPMENT TO PERFORM AS DESIGNED.
Maintaining clean oil is one of the best investments a company can make to keep equipment up and running, yet contamination often remains an overlooked factor behind premature machinery failure and diminished lubricant life. With increases in the cost of oil, greater desire to minimize usage and waste, and a compelling business case for prolonging equipment life, the economic and environmental reason for controlling contamination of lubricants – from the time oil enters a facility until it leaves – is stronger than ever.
 
Reduced downtime, less oil usage, and lower repair and recycling costs all add up to significant savings when solid reliability practices are in place. The cost of removing contaminants is 10 times the cost of preventing them.
 
TWO MAJOR SOURCES OF LUBRICANT CONTAMINATION
Dirt
If the atmosphere is contaminated, oil will become dirtier and lubricant quality becomes compromised. Particulate contamination, once inside an operating system, will accelerate the generation of new contaminants. These contaminants damage critical components and act as a catalyst for oxidation, further degrading the condition of lubricants.
 
Water
If the atmosphere is particularly humid or has frequent temperature fluctuations, the oil is probably moisture-laden and lubricant quality is compromised. Often times, plant wash down activities are responsible for inducing conditions that lead to moisture ingression and corrosion.
 
WHAT SHOULD I DO TO HELP KEEP CONTAMINATION UNDER CONTROL?
The good news is that these factors, which work together to threaten equipment reliability, can be effectively controlled with some cost-effective preventative maintenance techniques. The best and easiest way to exclude contaminants is to avoid practices that risk exposing lubes to contaminants. A multi-faceted program that includes some simple proactive steps can help conquer contamination.
 
Detection
The first step is often the most difficult. Equipment Reliability Services (ERS) are designed to help you critically evaluate an array of equipment information: the application, the industry, the environment the unit is in, the particular fluid used, the condition of the lubricant, and a variety of other factors. ERS can help you quickly identify the next steps you need to take, help your team learn the basics about contamination control, and perform cost-benefit analysis to help you in your implementation of best practices.
 
Prevention
As nearly all gearboxes, reservoirs and storage tanks are designed to breath, allowing only clean, dry air to enter the system is at the top of the list of steps to take. Replacing standard breather/filler caps with a desiccant breather immediately prevents moisture and moves particle filtration from 40 micron to 3 micron. Our MFG desiccant breathers combine a drying media with a combination of filters to prohibit the entry of water and microscopic particulates from entering the system. With a large variety of sizes, desiccants, and options, Our MFG has a breather to fit your need…or we’ll help you make one that does.
 
Removal
Filtration devices should be used to remove particles and moisture, further preserving the working life of the oil. They are not just a tool for emergency remedial measures when dealing with contaminated lubricants and hydraulic fluids. They should be used in regular, scheduled filtering intervals to help remove contaminants that have entered the system or were generated within the equipment. Our MFG provides a wide array of customizable, quality filtration units that are quickly delivered to you for use in your program.
 
 
“THE BOTTOM LINE”
Fluid degradation can be greatly reduced through proper lubrication maintenance which effectively starts with condition evaluation, breather protection and off-line filtration. Our MFG technical team can help you evaluate where you are, give you guidance on where to go, and provide the products to get you there. Now, implementing best practice contamination control techniques, maintaining clean, dry lubricants—and gaining the profitability that goes along with it—is easier than ever.
 
Fluid Handling a proactive approach to contamination control.
 
Simmons Synthetics provides a wide array of customizabe, quality fluid handling solutions for every step of your contamination control program. The broad depth of products range from various sizes of offline filtration systems to ensure clean tranfser of oil, dedicated filtration systems that perform around the clock, lubricant storage and handling systems adapter kits for easy system connection, vacuum dehydration for water removal and much more.
 
Sort by:

What's News

  • Base Oil Groups

    Base oil groupsMineral oil term is used to encompass lubricating base …

  • Fire Point

    The fire point of a fuel is the lowest temperature at which the vapour of that …

  • Extreme Pressure Additive

    Extreme pressure additives, or EP additives, are additives for lubricants with …

newsletter

Follow us on

Check out with PayPal

Copyright 2017 Shop Simmons Synthetics. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter